Chimney Sweeping and Maintenance Methods for Open Fires
chimney sweeping - All open fires need regular maintenance to keep them working efficiently and safely. With out this basic work, the risk of a chimney fire or co poisoning rises dramatically.
One of the key components of maintenance will be the sweeping of the chimney stack or flue. This removes all of the carbon as well as other waste products produced by burning solid fuel. Each type of fuel produces differing types of waste, and affects how regularly the chimney or flue will demand sweeping.
Wood burning fires- Four times a year
Coal and smokeless fuel- Twice yearly
Gas - Once yearly
chimney cleaner oklahoma city - An expert chimney sweep make use of a number of brushes and implements which can be attached with rods which can be completely fed up in the bottom of the chimney to clean the soot from the walls of the chimney or the liner.
The best time to achieve the chimney cleaned are at the beginning of autumn, following your soot has already established chance to dry through the summer and is also hard and brittle. This assists the chimney sweep, and is also easily removed. Alternatively sweeping following the fire was used continually for a couple days, which creates the same result. The loose soot and creosote will fall towards the lower chimney stack, where the sweep can eliminate it by employing a powerful industrial vacuum.
Even though the cleaning occurs, the chimney sweep will be able to create a professional assessment with the condition from the chimney in general. The brickwork may be failing in parts, resulted in fumes in the fire escaping to the home. This is normal with older properties since the mortar between your bricks includes a limited life span, and begins to crumble away over time, and throughout continually heating and cooling. Damaged whipped cream this really is to have the chimney relined. This is sometimes a necessary but expensive project.
There are numerous items that can be obtained on the market:
Concrete liner - A blow up template is placed within the full height of the chimney stack and concrete is poor around it. When the concrete went hard website is slowly removed along with a smaller concrete flue stays. The answer but has problems where the stack has bends there.
Clay, pumice, ceramic liners - are mainly set up in new properties, however, if you can use them on older buildings it is often the situation to remove areas of the chimney wall and install the liner after which rebuild and progress up the stack stage by stage. The priciest product but long term the strongest solution.
Stainless steel liners - installed by dropping the liner down the existing chimney and capping off at the top and bottom. Insulation is put across the liner to keep the liner in position also to assist with the pull of smoke from the fire. Undoubtedly the cheapest option, only a temporary solution of 10-20 years.